5 Series E60 545i (N62) SAL
22 11 100
Replacing right engine support arm (N62)
Necessary preliminary tasks:
•
Secure engine in installation position.
•
Remove both front wheels.
•
Remove underbody protection.
•
Remove reinforcement plate.
•
Lower front axle support.
Observe safety instructions on raising the vehicle.
Release grounding strap (1) from engine support arm.
Note:
Clean contact surfaces to ensure a safe ground connection.
Release screws (2) and nut (3) and remove engine support arm.
Tightening torque 22 11 2AZ/3AZ
.
RA Replacing right engine support arm (N62)
BMW AG - TIS
22.02.2013 14:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -