5 Series E60 545i (N62) SAL
![background image](/bmw/5_Series_E60/545i_N62_SAL/page-374003.png)
Press in retaining lugs (1) with screwdriver (2) and remove cable
duct (3).
Tie wiring harness to one side.
Release screws (1).
Tightening torque 23 00 1AZ
.
Supporting transmission:
Support transmission with special tools 23 4 050 , 23 0 132
and 00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
Release screws (1) and nuts (2) and remove cross-member.
Tightening torque 22 32 3AZ/4AZ
.
RA Removing and installing transmission (GS6-53BZ) N62/N62TU
BMW AG - TIS
22.02.2013 14:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -