5 Series E60 545i (N62) SAL
![background image](/bmw/5_Series_E60/545i_N62_SAL/page-386001.png)
23 42 508
Replacing pressure sensor GS6S53BZ (SMG)
Important!
Before working on hydraulic system:
-
Reduce pressure in hydraulic system by means of
Service Function in DIS Tester
-
Disconnect hydraulic pump relay in electronics box
Do not reconnect relay for entire duration of repair work
Note:
After completing work:
-
Check fluid level in hydraulic system by means of DIS Tester
"Service Function"
-
Perform "Teach in transmission" service function by means
of DIS Tester
Necessary preliminary tasks:
•
Remove underbody protection
Release screws (1) and remove protective plate.
Tightening torque 23 41 7AZ
.
RA Replacing pressure sensor GS6S53BZ (SMG)
BMW AG - TIS
22.02.2013 14:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -