5 Series E60 545i (N62) SAL
32 41 ...
Replacing suction line for power steering with
Dynamic Drive (N62, N62TU) (from cutting line
to power steering pump
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove front underbody protection
•
Remove intake filter housing
Unscrew nut (1).
Unfasten hose clip (2).
Detach suction line (3) and remove.
Installation:
Markings (4) on both suction lines must match up.
Replace self-locking nut.
Tightening torque 32 41 10AZ
.
RA Replacing suction line for power steering with Dynamic Drive (N62, N62TU) (from
BMW AG - TIS
22.02.2013 16:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -