5 Series E60 545i (N62) SAL
32 41 250
Removing and installing/replacing fluid
reservoir for power steering
Special tools required:
•
32 1 260
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
M54, N52, N53, N54: Remove intake filter housing
Release screw (1).
Tightening torque 32 41 9AZ
.
Note:
If necessary, raise and/or turn fluid reservoir in order to gain better
access to hose clamps.
Remove hose clamps if necessary with special tool 32 1 260 .
Disconnect suction and cooler return lines from fluid reservoir,
check and if necessary replace.
RA Removing and installing/replacing fluid reservoir for power steering
BMW AG - TIS
22.02.2013 16:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -