5 Series E60 545i (N62) SAL
![background image](/bmw/5_Series_E60/545i_N62_SAL/page-757002.png)
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Sunroof water drain hose is located behind severance cut a.
Measurement a = approx. 105 mm from roof edge.
Measurement b = approx. 150 mm behind bore dia. 6 mm.
Open weld joints in areas (1) and (4).
Note:
Side frame is bonded and welded to longitudinal member in area (3).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffle (2).
-
Weld in reinforcement plates at severance cuts.
-
Bond and rivet new part in area (4).
Use Hemlock 813 blind rivet (sourcing reference: BMW Parts Service picture board - Aluminium and
steel/bonding and welding).
Double number of rivets with respect to welding spots in area (4).
RA Replacing rear left side panel (partial replacement, longitudinal member cover b
BMW AG - TIS
22.02.2013 19:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -