5 Series E60 545i (N62) SAL
![background image](/bmw/5_Series_E60/545i_N62_SAL/page-870002.png)
Reach into trim (1) and unclip upwards from retainers (2).
Feed out trim (1) upwards over gaiter (3), disconnect associated
plug connection and remove trim (1).
Installation:
Make sure retainers (1) are correctly seated in associated
mountings of trim (2).
Replacement:
If necessary, remove driving dynamics switch.
RA Removing and installing/replacing trim for preselector lever (from 03/2007)
BMW AG - TIS
22.02.2013 21:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -