5 Series E60 545i (N62) SAL
41 63 003
Replacing cover bowl
Necessary preliminary tasks:
•
Remove flap for fuel filler neck
•
Remove servodrive for tank filler flap
Turn cover (1) through approx. 45
°
and lever out in direction of
arrow.
Remove rubber pad (3).
Press retaining strap (1) inwards and remove.
Remove cover (2).
Lever out seal (4) inwards.
Insert a suitable tool through bores (3) and release catches.
Installation:
Make sure seal (4) is correctly seated.
Important!
If seal (4) has been removed, it must be turned inside out.
Installation:
Catches (1) on ejector (2) must not be damaged.
Check protective cap (3) for correct seating.
RA Replacing cover bowl
BMW AG - TIS
22.02.2013 21:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -