5 Series E60 545i (N62) SAL
51 2. ...
Removing window cavity cover strip with
special tool 00 9 324 at front or rear
Special tools required:
•
00 9 318
•
00 9 324
Open complete door window glass.
Front door:
Insert special tool 00 9 324 at front (at A-pillar) in window
cavity (1) (letters TOP pointing upwards).
Rear door:
Insert special tool 00 9 324 at rear (at C-pillar) in window
cavity (2) (letters TOP pointing upwards).
Note:
For purposes of clarity, picture shows inner door panel and door
window glass removed.
Special tool 00 9 324 must be correctly guided under window
cavity cover strip (1).
2
Short leg, bottom
3
Long leg, top (TOP)
Note:
Start at the front or rear, depending on the model.
Important!
Risk of damage!
Raise window cavity cover strip (3) no more than 5 mm in
each levering operation, otherwise the strip will be bent.
Position special tool 00 9 318 on door trim panel (1).
Slide screwdriver (2) into special tool 00 9 324 and lever
window cavity cover strip (3) upwards no more than 5 mm.
RA Removing window cavity cover strip with special tool 00 9 324 at front or rear
BMW AG - TIS
22.02.2013 21:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -