5 Series E60 545i (N62) SAL
Remove stop pad (1).
Release screw (1).
Press mounting (2) back, lever out cover (3) at rear and remove
in direction of arrow.
Tightening torque 51 22 7AZ
.
Installation:
Following parts of cover on outside handle (5) must not be
damaged or missing:
1
Thread
2
Bridges
3
Bridges
4
Screw surface
RA Removing and installing/replacing cover on outside handle
BMW AG - TIS
22.02.2013 21:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -