5 Series E60 545i (N62) SAL
![background image](/bmw/5_Series_E60/545i_N62_SAL/page-1064004.png)
Suspend seal (1) with open lip pointing inwards over door. Pull
protection of positioning aid (liner) off seal in sections.
Stick on seal (1) as follows:
-
Position seal with color coding on door window frame at rear
top.
-
Gently press seal without stretching up to start of positioning
aids.
-
Check positioning of seal, correct if necessary (sag max.
30 mm).
-
Firmly press down seal vertically to adhesive area up to
above-mentioned area.
-
Gently press seal without stretching up to entrance area.
-
Check positioning of seal, correct if necessary and firmly
press.
-
Pull remaining protective film (liner) off seal.
-
Press remaining seal without stretching.
-
Check positioning of seal, correct if necessary and firmly
press.
Remove positioning aids and assemble front door.
RA Removing and installing/replacing seal on front door, left or right
BMW AG - TIS
22.02.2013 23:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -