5 Series E60 545i (N62) SAL
61 31 220
Removing and installing/replacing
multifunction steering wheel switches (sport
steering wheel, up to 09/2005)
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove airbag unit
Note:
Illustration shows steering wheel removed.
Release screws (1).
Tightening torque 32 33 2AZ
.
Important!
Risk of breakage!
Lever out complete steering wheel retaining plate (4) with
decorative trim (3) all round, do not tilt!
Release complete steering wheel retaining plate (4) with
decorative trim (3) in direction of arrow from fixtures (2).
Disconnect associated plug connections and remove complete
steering wheel retaining plate (4) with decorative trim (3).
Installation:
Make sure electrical leads are correctly routed.
Note:
Illustrations depict removal of the left multifunction steering wheel
switch. The right multifunction steering wheel switch is removed in
the same way.
Release screws (1) and remove left multifunction steering wheel
switch (2) from decorative trim (3).
Installation:
Make sure there is a uniform gap between both multifunction
steering wheel switches and decorative trim (3).
RA Removing and installing/replacing multifunction steering wheel switches (sport s
BMW AG - TIS
23.02.2013 02:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -