5 Series E60 545i (N62) SAL
61 35 950
Removing and installing (replacing) control
unit for comfort access system
Important!
Read and comply with notes on protection against
electrostatic discharge (ESD protection).
Note:
The comfort access system is a radio-based system and can be
interfered with by radio waves from other systems (e.g. mobile
phone).
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel
•
Remove luggage compartment trim on side panel on right
•
Disconnect battery negative lead
•
Remove trim for instrument panel, bottom left
Unclip pin (1) from shock absorber (2).
Open rotary clips (1) and remove.
Remove cover (2) in direction of arrow.
RA Removing and installing (replacing) control unit for comfort access system
BMW AG - TIS
23.02.2013 02:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -