5 Series E60 545i (N62) SAL
![background image](/bmw/5_Series_E60/545i_N62_SAL/page-1402001.png)
61 61 270
Removing and installing console for
windshield wiper system completely with
motor
Necessary preliminary tasks:
•
Remove cowl panel cover.
•
Remove tension strut on spring strut dome.
•
Remove fresh air duct.
Important!
Before fitting windshield wiper arms, allow wiper motor to run
into rest position.
Release screws (1).
Installation:
Tightening torque 61 61 15AZ
.
Remove cross-strut bearing block (2) in direction of arrow.
RA Removing and installing console for windshield wiper system completely with moto
BMW AG - TIS
23.02.2013 03:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -