5 Series E60 545i (N62) SAL
Important!
Follow instructions for handling optical fibers.
Necessary preliminary tasks:
•
Disconnect all necessary cable ties on support tube.
•
Release wiring harnesses/cable ducts and lay to one side.
•
If necessary, remove control units/disconnect plug
connections.
Installation:
Make sure wiring harnesses/cable ducts are correctly routed and
secured.
If necessary, remove CD changer (1) .
Loosen screws (2).
Set fuse-carrier (3) down in footwell.
Release screws (1).
Installation:
Tightening torque 32 31 6AZ .
RA Removing and installing or replacing heater
BMW AG - TIS
23.02.2013 04:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -