5 Series E60 545i (N62) SAL
![background image](/bmw/5_Series_E60/545i_N62_SAL/page-1614001.png)
65 77 720
Removing and installing/replacing left or right
B-pillar sensor (from 09/2005)
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove trim panel for door pillar (bottom)
Release screw (1).
Slacken screw (2) and feed out B-pillar sensor in downward
direction.
Tightening torque 65 77 5AZ
.
Installation:
Make sure centering pin (3) is correctly seated.
Replace screws (1 and 2).
Disconnect plug connection (1) and remove B-pillar sensor.
RA Removing and installing/replacing left or right B-pillar sensor (from 09/2005)
BMW AG - TIS
23.02.2013 05:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -