5 Series E60 545i (N62) SAL
67 31 ...
Notes on initializing electric seat servodrives
Note:
Initialization is carried out at the adjusting switch of the relevant
seat.
In this process, the end positions of the relevant electric seat
servodrive are recorded and stored.
An initialization must be performed:
•
After replacing a drive unit for seat adjustment.
•
After replacing/programming control unit for seat adjustment.
Operating sequence for initialization:
Move corresponding seat servodrive(s) into both end positions.
RA Notes on initializing electric seat servodrives
BMW AG - TIS
23.02.2013 06:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -