5 Series E60 545i (N62) SAL
![background image](/bmw/5_Series_E60/545i_N62_SAL/page-1703002.png)
Installation:
When inserting airbag module (1) in channel (2), make sure
channel rests all round airbag module. If necessary, pull channel
apart at sides.
Replace screws.
Tightening torque 72 12 02AZ
.
RA Removing and installing/replacing airbag module on passenger side
BMW AG - TIS
23.02.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -