5 Series E60 545i (N62) SAL
86 21 ...
Adjusting side lid to fit
Note:
The following text describes how to adjust the side lid to fit at
one mounting point as an example. Proceed in the same way
for all other mounting points.
Height adjustment of side lid:
Release screws (1) and move side lid in direction of arrows.
Installation:
Tightening Torque,
refer to Technical Data 86 21 7AZ.
Depth adjustment of side lid:
Release screws (1) and move side lid in direction of arrows.
Installation:
Tightening Torque,
refer to Technical Data 86 21 7AZ.
Adjust gap (A) evenly all around and correct if necessary.
RA Adjusting side lid to fit
BMW AG - TIS
23.02.2013 07:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -