5 Series E60 545i (N62) SAL
On vehicles with iDrive, the system can also be switched on and off with one of the programmable buttons on
the steering wheel.
BMW Night Vision can also be activated using the voice recognition system (SVS).
The following control units are involved in BMW Night Vision:
-
Display
> E60, E61, E63, E64: Central Information Display (CID)
The image recorded by the night-vision camera appears on the Central Information Display (black-and-white
image).
> E65, E66: Control display (CD)
The image recorded by the night-vision camera appears on the Control Display (black-and-white image). The
scale of the display is computed by the Control Display: split screen display <-> full screen display.
A menu for BMW Night Vision can be called up on the Display. Personal settings can be made in this menu.
[more ...]
-
CCC: Car Communication Computer
> E60, E61, E63, E64
The scale of the image on the Central Information Display is calculated by the Car Communication Computer:
split screen display <-> full screen display.
-
NAV: Navigation system
> E60, E61, E63, E64
If no video module is fitted, the FBAS wire from the Night-Vision electronics is connected to the Car
Communication Computer. The Car Communication Computer then transmits the image signals to the Central
Information Display via an LVDS data wire.
> E65, E66
If the vehicle does not have a video module, or does have a rear entertainment system, the FBAS wire from the
night-vision electronics will be connected to the navigation system. In such cases, the navigation system will
transmit the image signals to the Control Display via an RGB wire.
-
VM: Video module
On vehicles with television, the FBAS wire from the night-vision electronics is connected to the video module.
> E60, E61, E63, E64 (EURO version)
The video module transmits the image signals to the Car Communication Computer (CCC) via an FBAS wire.
> E60, E61, E63, E64 (Japan version)
The video module transmits the image signals to the Car Communication Computer (CCC) via an RGB wire.
> E65, E66
The video module transmits the image signals to the Control Display (CD) via an RGB wire.
> E65, E66 (US version)
The video switch supersedes the video module.
-
DSC: Dynamic Stability Control
The DSC control unit transmits the following signals through the PT-CAN:
•
Vehicle road speed
•
Steering angle
•
Yaw rate
The night-vision electronics needs these signals, for example for the zoom function and to pan an image
section.
SBT BMW Night Vision E60, E61, E63, E64, E65, E66
BMW AG - TIS
23.02.2013 15:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -