5 Series E60 550i (N62TU) SAL
11 00 670
Securing engine in installation position (N62,
N62TU)
Special tools required:
•
00 0 200
•
00 0 202
•
00 0 204
•
00 0 208
•
11 0 000
Warning!
Danger of injury!
Observe following instructions relating to special tool:
1.
Prior to each use, check the special tools for defects,
modifications and operational reliability.
2.
Damaged/modified special tools must not be used!
3.
No changes or modifications may be made to the special
tools!
4.
Keep special tools dry, clean and free of grease.
Necessary preliminary tasks:
•
Secure engine bonnet/hood in service position
•
Remove acoustic cover
•
Remove intake filter housing
•
Detach coolant expansion tank and place to one side
•
Remove tension strut (on spring strut dome)
Assemble transverse member 00 0 200 with special tools
00 0 202 , 00 0 204 , 00 0 208 .
RA Securing engine in installation position (N62, N62TU)
BMW AG - TIS
22.02.2013 12:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
