Changing and Topping Up Gear Oil in Manual Transmission Instructions
Release screw (1).
Tightening torque 23 41 17AZ
.
Clean gear oil screen, replace if necessary
Installation:
Replace sealing ring
Release screw (1).
Tightening torque 23 41 16AZ
.
Remove gear oil cooler in direction of arrow.
Installation:
Journal (1) on gear oil cooler must be secured in rubber
grommet (2)!
Adding gear oil.
-
Undo oil filler plug (2).
-
Add 2.0 ltrs. of gear oil.
-
Refit oil filler plug (2).
-
Check gear oil level (see below).
RA Changing / topping up / checking gear oil in manual transmission
BMW AG - TIS
22.02.2013 15:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
