bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Checking Compression Of All Cylinders (S85)|Page 277 > < 4 RA Removing And Installing_replacing Acoustic Cover (N52_N52K)
Page 1
background image

11 00 039

Checking compression of all cylinders (S85)

Special tools required:

11 0 224

11 0 235

Important!

High tension - mortal danger!

Disconnect all supply leads from ignition coils (interrupt power
supply to ignition coils).

Check Schrader valve on special tool 11 0 235  for correct
seating (engine damage).

The throttle valves cannot be opened by opening the throttle.

A compression check is carried out exclusively by means of the
idle actuators.

A compression check is only possible with the diagnosis tester.

Necessary preliminary tasks:

Remove microfilter housing.

Release coolant tank and place to one side

Remove all spark plugs.

Connect diagnosis tester.

1.

Service function.

2.

Drive.

3.

Engine electronics

4.

Switch off fuel injection.

Important!

Fuel injectors are switched off.

5.

Actuate starter motor for 8 seconds.

RA  Checking compression of all cylinders (S85)

BMW AG - TIS

22.02.2013  16:03

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Checking Compression Of All Cylinders (S85)|Page 277 > < 4 RA Removing And Installing_replacing Acoustic Cover (N52_N52K)