5 Series E60 M5 (S85) SAL
11 12 112
Replacing both cylinder head gaskets (S85)
Necessary preliminary tasks:
•
Remove left cylinder head.
•
Remove right cylinder head.
•
Check cylinder head for leaks.
Important!
Do not open screw plugs.
The screw plug must always be replaced if it is opened by
mistake.
Installation:
If necessary, replace non-return valve with spacer sleeve (1).
Check dowel sleeves (1) for damage and correct installation
position.
Installation:
Clean sealing surfaces.
Illustration shows cyl. 6-10.
Replace head gasket (1).
Note:
Illustration shows cyl. 1-5.
RA Replacing both cylinder head gaskets (S85)
BMW AG - TIS
22.02.2013 16:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
