5 Series E60 M5 (S85) SAL
Warning!
Protective goggles must be worn.
Important!
Setting of special tool 11 5 343 must not be altered.
Installation:
Insert piston circlip (2) so that opening points to window.
Insert piston circlip (2) into groove (1) of special tool 11 5 343 .
Note:
Illustration shows N52.
Position special tool 11 5 343 with window to opening on piston
(see arrow).
Position special tool 11 5 343 with window to opening on piston
(see arrow).
Warning!
Protective goggles must be worn.
Guide lug and cutout on special tool 11 5 343 must point to
piston crown.
When special tools 11 5 343 and 11 5 344 are correctly
positioned, the piston circlip must be driven in with a plastic
hammer in the direction of the arrow.
Note:
See illustration.
RA Removing and installing/replacing all pistons (S85)
BMW AG - TIS
22.02.2013 16:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -