5 Series E60 M5 (S85) SAL
Installation:
All bearing shells are assigned to one cylinder.
E and A from (1 to 10), e.g. A 6= exhaust side on
6th cylinder.
Arrow (1) must point in direction of travel to chain drive.
Installation:
Arrangement of bearing shells, cylinders 6 to 10.
Important!
Mixing them up will result in increased wear - risk of damage!
Mount special tool 11 5 241 with special tool 11 5 242 .
Pretension eccentric shaft at hexagon head in direction of arrow.
Important!
Exhaust camshaft is pressed upwards by valve springs.
Lock (1) must snap audibly into place.
Install all bearing caps by numbers.
Tightening torque: 11 31 7AZ
.
Adjust valve timing.
Assemble engine.
RA Removing and installing / replacing left exhaust camshaft (S85)
BMW AG - TIS
22.02.2013 16:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
