5 Series E60 M5 (S85) SAL
Note:
•
If the central bolt is released, the removed hexagon socket
screws are reinstalled with a joining torque of 10 Nm.
Installation:
Replace central bolts (1 and 2).
Important!
Danger of injury!
Installation:
If the VANOS gear is to be reused, the special tool 11 5 382
must not be removed.
VANOS gear is tensioned.
Tilt special tool 11 5 381 in direction of arrow.
If the VANOS gear is to be replaced by a new part, the special
tool 11 5 381 can be removed.
Remove VANOS gear with special tool 11 5 381 .
Important!
Danger of injury!
Installation:
If the VANOS gear is to be reused, the special tool 11 5 381
must not be removed.
VANOS gear is tensioned.
Set down VANOS gear (1) with special tool (2).
Installation:
If necessary, turn transportation lock on VANOS gear into a
favourable position.
Install exhaust VANOS gear (1) in position.
Installation:
M8x18 hexagon socket screw points upwards.
One of the three screws points downwards.
Insert central bolt, join slightly and then release again through 90
°
.
Remove M8x18 hexagon socket screw or special tool 11 5 370 .
RA Removing and installing / replacing right exhaust VANOS gear (S85)
BMW AG - TIS
22.02.2013 16:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
