5 Series E60 M5 (S85) SAL
Release screws and detach Hall sensor (1) towards front.
Installation:
Make sure Hall sensor is installed in correct position.
Important!
After performing work on the throttle valve system (throttle
valve assembly, servomotor, Hall sensor), it is absolutely
essential to carry out a throttle valve actuator system test with
the BMW diagnosis system!
Function selection:
-
Complete vehicle
-
Drive
-
Engine electronics
-
Air supply
-
Throttle valves
-
Throttle valve actuator
Note:
Check stored fault messages
Clear fault memory
RA Removing and installing/replacing left Hall sensor (S85)
BMW AG - TIS
22.02.2013 17:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -