5 Series E60 M5 (S85) SAL
Observe the following procedure when installing the removed
clutch and clutch plates.
Insert special tool 21 2 180 in clutch.
Press special tool 21 2 180 together at handles (1) as far as it
will go and tighten down knurled screws (2).
Adjustment ring of clutch is now secured in its original position
(wear position).
Note:
Locking hooks (1) of special tool 21 2 180 must engage in
openings of pressure spring.
Fit special tool 21 2 170 and tighten down at knurled screw (1).
Screw in spindle (2) up to uppermost pressure point of
diaphragm spring (3).
RA Removing and installing/replacing clutch (GS6-53BZ) (S85 USA only)
BMW AG - TIS
22.02.2013 18:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
