5 Series E60 M5 (S85) SAL
Apply a thin coating of grease to release lever at sliding
surfaces (1 and 2) only.
Grease, refer to BMW Service Operating Fluids.
Installation:
Check spring wire clip (5) and ball pin (6) for damage and
replace if necessary.
Apply a thin coating of grease to ball pin (6).
Grease, refer to BMW Service Operating Fluids.
Installation:
Clean guide sleeve (7).
Coat guide sleeve with a thin film of grease.
If guide sleeve is greased, the release lever can stick on the guide
sleeve.
Grease, refer to BMW Service Operating Fluids.
RA Removing and installing or replacing clutch release bearing/lever (GS7S47BG SMG)
BMW AG - TIS
22.02.2013 18:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
