5 Series E60 M5 (S85) SAL
Release screws (1) and nuts (2) and remove cross-member.
Tightening torque 22 32 3AZ/4AZ
.
Lower transmission.
Unlock plug (1) and remove.
Unclip plug (1) from holder, unlock and disconnect.
Unlock connector (2) and remove.
Installation:
Check pins of plugs (1) and (2) for damage, reset pin if
necessary.
Detach plug (1) from hydraulic pump.
Lay wiring harness to one side.
RA Removing and installing transmission (GS7S47BG SMG)
BMW AG - TIS
22.02.2013 18:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
