5 Series E60 M5 (S85) SAL
Remove shim and dust gaiter.
Pull off centre bearing with special tool 00 7 500 / 33 1 307
and commercially available puller.
Drive new centre bearing firmly home with special tool 24 0 090
or 24 1 050 .
Note:
Bearing inside diameter 30 mm, use special tool 24 0 090 .
Bearing inside diameter 35 mm, use special tool 24 1 050 .
RA Replacing complete propeller shaft centre bearing (constant-velocity joint)
BMW AG - TIS
22.02.2013 19:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
