5 Series E60 M5 (S85) SAL
34 00 009
Brake test on brake analyzer (test stand) (S85)
Necessary preliminary tasks:
•
Check tyres for damage
•
Check tyre treads
•
Check tyre pressure
The brakes must be at normal operating temperature. For this
purpose, gently warm up the brake disks/drums while dry by
braking the vehicle several times.
Important!
Only brake test stands (dynamic analyzers) with test speeds
of 2.5-6 km/h may be used.
You must follow without fail the guidelines contained in the
operating instructions of the relevant test stand manufacturer.
Failure to do so may result in damage to the vehicle and the
system and also personal injury.
RA Brake test on brake analyzer (test stand) (S85)
BMW AG - TIS
22.02.2013 21:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -