5 Series E60 M5 (S85) SAL
34 52 550
Removing and installing/replacing DSC
sensor (S85)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove right front seat
•
Remove front inside entrance cover strip
Lift carpet (1) and fold to side.
Release screws (2) and swing out DSC sensor (3).
Installation:
Tightening torque 34 51 3AZ
.
Unlock plug connection (1) and remove DSC sensor (2).
Installation:
Make sure plug connection locks correctly.
RA Removing and installing/replacing DSC sensor (S85)
BMW AG - TIS
22.02.2013 21:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
