5 Series E60 M5 (S85) SAL
37 14 511
Replacing front ride-height sensor (M5, M6)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove right steering gear cover
Release nut (1) and disconnect jointed rod.
Tightening torque 37 14 7AZ
.
Release screws (2), remove ride-height sensor from bracket and
disconnect plug connection (3).
Installation:
Sensor lever must point from ride-height sensor to right front
wheel.
Tightening torque 37 14 6AZ
.
After installation:
•
Check headlight adjustment, correct if necessary
RA Replacing front ride-height sensor (M5, M6)
BMW AG - TIS
22.02.2013 22:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
