5 Series E60 M5 (S85) SAL
51 71 482
Removing and installing / replacing left or
right tension strut (on rear axle) (M5, M6)
Important!
Observe safety instructions for raising the vehicle
Do not drive vehicle without tension strut installed; failure to
comply with this instruction will result in damage to the body!
Release screws (1 and 2).
Remove tension strut (3).
Installation:
Replace screws.
Tightening torque 51 61 3AZ
.
RA Removing and installing / replacing left or right tension strut (on rear axle) (
BMW AG - TIS
23.02.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
