5 Series E60 M5 (S85) SAL
52 16 054
Removing and installing/replacing adjusting
unit for seat back width adjuster on left or
right front seat (M5)
Necessary preliminary tasks:
•
Remove front seat
•
Remove rear panel on front seat backrest
•
Remove inner cover on front seat
•
Remove backrest cover for front seat
Release cable tie (1).
Installation:
Lay cables (3) without kinks.
Disconnect plug connection (2) on drive.
Release rivets (1) on left and right and remove adjusting
elements (3).
Release rivets (2) for drive.
Remove complete adjusting unit.
Note:
Adjusting element (3), cables and drive form a single unit and
can only be replaced completely.
RA Removing and installing/replacing adjusting unit for seat back width adjuster on
BMW AG - TIS
23.02.2013 03:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
