5 Series E60 M5 (S85) SAL
64 11 206
Removing and installing or replacing heater
Necessary preliminary tasks:
•
Draw off refrigerant from A/C system.
•
Remove fresh air duct.
•
Remove trim for instrument panel.
•
Remove temperature sensor for cold-air distributor.
Warning!
Follow instructions for working on cooling system.
Warning!
To avoid injury, cover holder (1) on support tube (2).
Unscrew nuts (1).
Installation:
Tightening torque 64 53 8AZ .
Detach refrigerant line (2) in direction of arrow.
Unclip refrigerant line (3).
RA Removing and installing or replacing heater
BMW AG - TIS
23.02.2013 07:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
