bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing A_C System Compressor (S85)|Page 2646 > < 3 RA Replacing A_C System Compressor (M57, M54)|Page 2644
Page 1
background image

64 52 523

Replacing A/C system compressor (S85)

Warning!

Risk of injury!

Refrigerant circuit is under high pressure!

Follow safety instructions for handling R 134a refrigerant .

Follow safety instructions for handling refrigerant oil.

Avoid contact with refrigerant and refrigerant oil.

Important!

Risk of damage!

Restart engine only when A/C system has been correctly
filled.

Read and comply with notes on replacing compressor.

Follow instructions for opening and replacing parts in
refrigerant circuit.

If A/C system is opened for more than 24 hours: 

Replacing drier insert for A/C system

Necessary preliminary tasks:

Drawing off, evacuating and filling the A/C system are not

included in the time value given for this work operation

Remove right intake filter housing

Remove A/C compressor drive belt

Remove front underbody protection

Remove stabilizer from front axle carrier

Remove right tension strut from front axle carrier

Release screws (1).

Disconnect pressure and suction lines.

Disconnect plug connection (2).

Installation:

Replace all sealing rings and moisten with refrigerant oil.

Tightening torque 64 52 1AZ

.

RA  Replacing A/C system compressor (S85)

BMW AG - TIS

23.02.2013  07:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing A_C System Compressor (S85)|Page 2646 > < 3 RA Replacing A_C System Compressor (M57, M54)|Page 2644