5 Series E60 M5 (S85) SAL
Note: Reactivating DSC
Briefly pressing the button again reactivates the DSC function. The DSC indicator and warning light goes out
(unless a fault has developed in the system).
If the DTC button is pressed for longer than 10 seconds (e.g. by a handbag on the centre console), DSC
will recognise an operating error. The DSC function remains active and cannot be deactivated until the
ignition has been switched off and on again.
Preconditions for activation
DSC is in ready mode after each engine start.
Notes for service staff
The following information is available for service staff:
-
General information: [more ...]
-
Diagnosis: [more ...]
-
Encoding/programming: [more ...]
Subject to change.
SBT Dynamic Stability Control 8Plus E60, E61, E63, E64, E83, E90, E91, E92
BMW AG - TIS
23.02.2013 19:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -