5 Series E61 520d (M47T2) TOUR
Installation:
Fit special tool 11 7 400 to crankshaft.
Oil sealing lip of new radial seal and push over special tool
11 7 400 until radial seal rests against timing case cover.
Remove special tool 11 7 400 .
Installation:
Fit special tool 11 5 110 to crankshaft.
Insert central screw.
Using special tool 11 5 110 and central bolt 11 7 410 ,
install radial seal flush with timing case cover.
Assemble engine.
RA Replacing radial seal in timing case cover at bottom (M47TU / M47TU2)
BMW AG - TIS
25.01.2013 18:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
