5 Series E61 520d (M47T2) TOUR
11 51 000
Removing and installing or replacing water
pump (M47TU / M47TU2 / M57TU / M57T2)
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Necessary preliminary tasks:
•
Remove and install coolant thermostat.
Release screws (1).
Remove water pump (2).
During the following work steps, the sealing face on the
crankcase must not be damaged.
RA Removing and installing or replacing water pump (M47TU / M47TU2 / M57TU / M57T2)
BMW AG - TIS
25.01.2013 19:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -