5 Series E61 520d (M47T2) TOUR
Release screw (1).
Slacken screw (2).
Turn fixture in direction of arrow.
Release quick-release coupling on intercooler.
Remove complete charge air tube/hose.
Important!
-
Seal turbocharger openings with a cap immediately.
Release banjo bolt.
Tightening torque 11 65 7AZ .
Disconnect oil line.
Note:
Seal connection of oil line and bore in crankcase with a cap.
Installation:
Replace sealing rings.
Disconnect plug connection (2).
Installation:
Illustration shows (M57T2).
RA Removing and installing or replacing exhaust turbocharger (M47T2)
BMW AG - TIS
25.01.2013 19:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -