5 Series E61 520d (M47T2) TOUR
Release clamp (1) and detach oil return hose from crankcase.
Release screws (2).
Remove turbocharger towards bottom.
Note:
Illustration similar.
Release screw on oil pressure line (1).
Tightening torque 11 65 7AZ
Installation:
-
Replace seals.
-
Oil pressure line (1) must be installed parallel to
turbocharger housing.
Convert oil pressure line (1) to new turbocharger.
Installation:
-
Replace all gaskets.
-
Clean sealing faces on exhaust manifold.
Assemble engine.
Check engine oil level.
RA Removing and installing or replacing exhaust turbocharger (M47T2)
BMW AG - TIS
25.01.2013 19:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -