5 Series E61 520d (M47T2) TOUR
32 41 100
Removing and installing/replacing belt pulley
on vane pump for power steering
Note:
Carry out preliminary work as described in the document "
Replacing drive belt ".
Slacken screws (1)
Relieve tension on drive belt and remove from belt pulley (2).
Unscrew bolts (1) and remove belt pulley (2).
Installation:
Lettering on belt pulley (2) must point forwards.
Tightening torque 32 41 14AZ
.
RA Removing and installing/replacing belt pulley on vane pump for power steering
BMW AG - TIS
25.01.2013 22:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
