5 Series E61 520d (M47T2) TOUR
34 52 550
Removing and installing / replacing DSC
sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove right front seat
•
Remove front inside entrance cover strip
•
Lift carpet and fold back to one side
Note:
The yaw sensor comprises the function of the transversal-
acceleration sensor and the yaw sensor.
Unlock plug connection.
Installation:
Make sure plug connection locks correctly.
Release screws (1) and remove rotation rate sensor.
Installation:
Tightening torque 34 51 3AZ
.
Carry out calibration/adjustment of DSC sensor.
RA Removing and installing / replacing DSC sensor
BMW AG - TIS
26.01.2013 00:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -