5 Series E61 520d (M47T2) TOUR
41 34 038
Replacing outer section of tail panel
Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU 41 34 038)
for details of stripping-down and rigging work.
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Following new body parts are required (refer to EPC):
-
(1) Rear trim, outer skin
Open weld joints in areas (1).
Open brazed joints in areas (2).
Open weld joints in area (1).
Note:
Bend panel open in area (1) and open welded spot.
RA Replacing outer section of tail panel
BMW AG - TIS
26.01.2013 02:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -