5 Series E61 520d (M47T2) TOUR
51 16 366
Removing and installing right glovebox with
housing
Necessary preliminary tasks:
•
Remove footwell side trim panel on A-pillar on right.
•
If necessary, remove trim for instrument panel at bottom right
Note:
Open glovebox.
Unclip pin (1) from retaining strap (2).
Unclip pin (1) from shock absorber (2).
Release screws (1).
Release screws (2) and pull back right glovebox with
housing (3).
Disconnect associated plug connections and remove right
glovebox with housing (3).
RA Removing and installing right glovebox with housing
BMW AG - TIS
26.01.2013 03:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -