5 Series E61 520d (M47T2) TOUR
Disconnect remaining plug connections.
Remove door trim.
Installation:
Connect all plugs to original locations.
Installation:
All clips (2) are white.
If necessary, replace faulty clips (2).
Attach central clip mounting (1) to door trim panel.
Installation:
After assembling the door trim panel proceed as follows:
-
Open door window.
-
Lock with vehicle key.
-
check whether the locking knob linkage can move freely,
align linkage if necessary
RA Removing and installing rear left or right door trim panel (up to 03/2007)
BMW AG - TIS
26.01.2013 04:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -