5 Series E61 520d (M47T2) TOUR
Disconnect plug connection (1).
Unfasten screws (2).
Tightening torque 51 43 5AZ
.
Raise cover (1) slightly and feed out comfort operating unit (2)
completely.
Replacement up to build date 06/2006:
Note:
A capacitor is integrated in the drive on the new part.
Adapter lead (1) with capacitor must not be fitted.
If necessary, remove adapter lead (1) and connect plug (2) of
vehicle wiring harness directly to plug (3) of drive.
RA Removing and installing/replacing comfort operating unit
BMW AG - TIS
26.01.2013 04:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -